Pholsy Wireless Shutter Remote Control with Digital Timer for DSLR Cameras

Highlights:
Compatible Devices: Compatible with Fujifilm cameras
Connectivity Technology: Radio Frequency
Battery Description: Alkaline
Maximum Range: 60 Meter
Batteries: 4 AAA batteries required
Cable length: Not stretched 35 cm; stretches to approximately max 130 cm
Transmission distance: 2.4GHz 60m+ (open space without interference)
Dimension: Timer - L 130.4mm X W 46.2mm X H 22mm; receiver - L 85mm X W 37.4mm X H 30.9mm
Weight: Timer 56.5g; receiver 37.5g

Description:
The PHOLSY is a combined wireless and timer controlled remote shutter release.
It is ideal for a wide variety of photographic uses that require timed or contact free shutter release, 
including wildlife, long exposure, astral, studio and time lapse photography.
The wireless/wired timer and shutter release offers photographer an amazing number of triggering options,
including Auto bracketing for HDR, shooting photos wired or wirelessly using self-timer,
interval timer, long exposure timer or a combination of the three, 
auto bracketing long exposure mode for HDR photography, and it will shoot 3, 5 or 7 shots with Auto bracketing shutter speeds.

Setting the Smart Code:
If the Receiver's light doesn't change to red, that means it hasn't received the signal from the Transmitter. 
Please follow the below steps to set the Smart Code.
The frequency of transmitter and receiver will be pre-set in production.
You can use the timer instantly.
To reset the smart code, please follow the procedures:
Turn on the transmitter and receiver.
Use a needle-like object to press into the code setting button on receiver, 
which will cause the LED on receiver to flash red and green light alternately for 25s.
Press the shutter button on transmitter to reset the code during the code setting mode.
When the code is successfully set, the LED on receiver will get back to normal mode flashing green light.
When capturing the beautiful moments of sunrise and sunset and flowers bloom and fade, you don't need to wait for the whole time .
You can set slow down timer, exposure time, interval time, number of shoots, repeat shooting interval time and repeat times.
Using Timer mode:
Press the Sound/Mode Button until Timer is selected on the LCD. With Timer selected, press the left or right
Adjustment Buttons to select slow down, LONG, INTVL, N, BKLN.
A small indicator line will appear on the LCD under the selection.
Press the Play/Stop Button to start or stop programmed timer functions
Large LCD Display gives you a visual reference so you can operate the remote controller easily.
mer can be accurate to 0.1 sec.
You can set the slow down time and exposure time to minimum 0.1.
The minimum interval time is 1 sec, you can adjust the intervals in 0.1 increments starting at 1 second.

Changing shutter release modes:
Press the Sound/Mode Button to cycle between modes. A small indicator line will appear on the LCD over theselection.
The modes are:
S: Shutter Release.
C: Continuous.
B: Bulb.
2S: 2 second.
Timer: Gives access to the timer mode functions.
Press the Shutter Release Button to start or stop the four shutter release modes

What is in the box: 
1 X PHOLSY wireless timer remote control timer, 1 X PHOLSY wireless timer remote control receiver, 2 X Connecting cables N8 and N10, 2 X Lanyard sling, 1 X Instruction manual