Joyetech E Grip II VT Kit - 80W E-Cigarette with Notch Coil and LED Colors

• Variable temperature control
• Real time clock display & screen protection
• Game mode and custom logo
• All-in-one device with TFTA-Tank Technology
• Notch coil head brings wonderful experience
• Advanced dual battery protection
• Eliquid illumination LED with 7 changeable colors
• Firmware Upgradeable

Package Content:

• 1 x eGrip II
• 1 x NotchCoil 0.25ohm DL.
• 1 x BF SS316 0.5ohm coil head DL.
• 1 x BF Clapton 1.5ohm coil head MTL.
• 1 x BF RBA M&L. (vertical rebuild)
• 1 x mouthpiece
• 1 x atomizer Adapter
• 1 x USB Cable
• 1 x Manual & Warranty Card

Operation Guide;

• Power on/off: Press the fire button 5 times in quick succession to turn the device on. In the same way, the device will be powered off after 5 presses.
• Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
• Shift between VT/VW/Bypass/TCR Modes:
  • Press the fire button for three times to shift between diffferent Modes when the battery is on.
  • (1)under VW mode, it presents: battery life, ohm, voltage and wattage.
  • (2)under VT mode, it presents: battery life, ohm, wattage, temperature and mode (Ni/Ti).
• Adjust the wattage/temperature:
  • Under VW mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the wattage (up to 80W);
  • under VT mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the temperature (100-315C/200-600F).
  • Rotate the ring faster clockwise or counterclockwise for continuous three grades, the device automatically increase or decrease 0.1W/5C(10F) numerically.
• Atomizer head replacement/refilling: TFTA-Tank technology means Top Filling and Top Airflow. Coil replacement and juice fill can be achieved by removing the top section from the cup.
• Apply the Atomizer Adapter: Unscrew the mouthpiece base, and screw the atomizer adapter tightly with a tool (coin), then you can apply other types of atomizer with eGrip II.
• Charging: Plug into the charging port. It usually takes 2.5 hours to fully charge the battery via 1A wall adapter.